What are the steps of using automated pvc dispensing machine?

How about automated pvc dispensing machine? This problem can not be generalized, but should be analyzed according to your specific situation. Here is a brief introduction to the use of automated pvc dispensing machine for your reference. Dispensing machine, also known as PVC applicator, pvc dropping machine, pvc applicator, etc., is an automatic machine that specially controls the fluid, drips and coats the fluid on the surface or inside of the product. The dispensing machine is mainly used to accurately spot, inject, apply and drip pvc, paint and other liquids in the product process to the precise position of each product. It can be used to dot, draw lines, circle or arc.

What should we consider before using the automated pvc dispensing machine?

What should we pay attention to when using automated pvc dispensing machine?

What should we pay attention to after using the automated pvc dispensing machine?

What should we consider before using the automated  dispensing machine?

First send the compressed air to the syringe of the adhesive dispenser or the adhesive bottle.It is important to ensure that the syringethe gel bottle is clean and free of impurities.Do not mix different adhesives in a container during the daily dosing process. If mixing and dosing is required, the pvc cylinder should be cleaned in good time after mixing. After using the glue, place the glue in a cool, ventilated and dry place that is not easy to touch. Tighten the rubber cover to prevent leakage of the gel. If the automated glue dispensing machine has a large leak, it can be hardened with water and then eliminated.

What should we pay attention to when using automated pvc dispensing machine?

Next is how to press the pvc into the feed pipe connected to the piston chamber. In the compression process, the compression range, style specifications, and surface requirements directly affect the quality of the press. It is necessary to strictly control the related variables of the automated pvc dispensing machine to ensure the quality of the pvc.

During the caulking process, the pvc is pressed into the pipeline, and it stays in the pipeline of the automated pvc dispensing machine for a short period of time and flows out from the needle in a shape or dot pattern according to the dispensing requirements. When the piston is on the upstroke, the piston chamber will be filled with pre-added pvc. When the piston pushes down the PVC needle, the pvc is squeezed and will be pressed out from the needle tip.

What should we pay attention to after using the automated pvc dispensing machine?

The last process is the pvc. In the pvc dispensing process of the automated pvc dispensing machine, the PVC size is often inconsistent or the pvc is not smooth. At this time, the four links need to be checked and confirmed. The first is the PVC ratio. In many cases, the pvc is not smooth because the pvc is too silky. Another thing to check is the working air pressure, to maintain a suitable and stable working air pressure. The third thing to pay attention to is the patency of the pipeline. The last thing to pay attention to is whether the temperature of the automated pvc dispensing machine is normal. It should be pointed out that the amount of pvc dripped is determined by the distance of the plunger, which can be adjusted manually or through programming.

After reading this, have you also had the idea of ordering automated pvc dispensing machines. At Dong Guan Do Hearts Technology Co.,Ltd., you can get the best quality automated pvc dispensing machines and the most intimate after-sales service.