How to use the pvc dispensing machine?

High-viscosity pvc usually has poor fluidity and requires a lot of pressure to squeeze out the pvc Therefore, for the convenience of dispensing, the general high-viscosity automated pvc dispensing machine is equipped with a heating device, and the PVC has high fluidity when heated, which is convenient and easy. Dispensing, the amount of pvc is easy to control.

What is the current working principle of the automated pvc dispensing machine?

What should we pay attention to before using the automated pvc dispensing machine?

What are the features of automatic pvc dispensing machine?

What is the current working principle of the automated pvc dispensing machine?

Fluid jet dispensing is a recently developed automated pvc dispensing machine dispensing technology. The basic principle of a desktop dispenser is similar to an inkjet printer. The automated pvc dispensing machine can automatically separate materials by applying enough force to the fluid. Under the action of colloidal pressure, the gap between the injection needle and the syringe is filled with colloidal solution. First, under the action of air pressure, the nozzle moves upward and stays at the highest position for an appropriate time. Under the action of the spring force, the nozzle moves downwards, the end sphere collides with the base, the flowing pvc is cut, and the pvc at the lower end of the sphere is ejected from the nozzle at high speed to form pvc drops. Then the needle stays at the lowest position for a period of time, and then the needle moves upward, and the automated pvc dispensing machine starts the next movement cycle.

What should we pay attention to before using the automated pvc dispensing machine?

First, send the compressed air to the syringe of the automated pvc dispensing machine or the pvc bottle. Before this, it is necessary to ensure that the syringe or the gel bottle is clean and free of pollution. Be careful not to mix different pvc in one container during daily dispensing operations. If there is a requirement for mixing and dispensing, the pvc cylinder should be cleaned in time after mixing. After using the pvc, place the pvc in a cool, ventilated and dry place that is not easy to touch. Tighten the rubber cover to prevent leakage of the gel. When the automated pvc dispensing machine has a large amount of leakage, it can be cured with water and then scraped off.

What are the features of automatic pvc dispensing machine?

First of all, the automated pvc dispensing machine saves manpower and does not require a large number of workers to operate. Just press a few buttons. The operation is simple. Secondly, the automatic pvc dispensing machine has a very complete loading, unloading, transportation, dispensing and other functions. Good material saving.

Then the automated pvc dispensing machine has a modular design, which is relatively stable in operation, easy to maintain, and has a relatively powerful storage function. One machine can dispense multiple different products, and one machine has multiple uses.

The wide application of automated ovc dispensing machine is the product of technological development. For more information about automated pvc dispensing machine, please contact Dong Guan Do Hearts Technology Co.,Ltd has committed to providing the increasing of automated pvc dispensing machine, and make them more effective, reliable, and consistent.