What are the steps of using an embossing machine?

The embossing machines are mainly used for sewing, welding, cutting, and stamping synthetic fiber fabrics. For example: sewing the edge of a three-dimensional flax bag; printing of the upper end and edge of the flax bag; Melting of Velcro; stamping of PVC material; Painting and welding on clothes.

What parameters should the embossing machine see to make it no longer work?

For what reasons do people opt for embossing machines?

What are the characteristics of the embossing machine?

What parameters should the embossing machine see to make it no longer work?

1. Overload:

The red control light illuminates and indicates that the embossing machine is overloaded. At this point, the machine should be stopped immediately and the work can only be continued after checking the cause and eliminating the error.

2. Sound wave setting:

Set the resonance state between the ultrasonic vibrator and the steel form. Turn the button clockwise or clockwise, the display of the amplitude meter changes. As mentioned above, the normal reading of the embossing machine is generally within 50.

3.Audio:

The function is to test whether the ultrasound is normal. Press the 1-to-2 switch for seconds to see if the overload indicator is illuminated and the measured values of the amplitude meter and the implementer are in the normal range.

4. Power switch:

Check the performance of the entire machine. The switch is supplied with a red tell-tale that lights up when the pre-press is switched on.

For what reasons do people opt for embossing machines?

1. The embossing machine has a short welding time, and the automatic sewing with ultrasound makes needles and threads superfluous, which saves frequent needle switching. The sewing speed is five to ten times the sewing machine quilts and the width is determined by the customer;

2. Since needles are not needed, the pre-press prevents broken needles from remaining in the sewing material and avoids potential safety risks. It is a new generation of safe and environmentally friendly products;

3. The embossing machine does not have the broken joints of the traditional thread stitching, with strong adhesion, clear embossing, and the surface has a three-dimensional relief effect, and the product is higher quality and more beautiful;

4. After the molding machine has been processed, the finished product has no needle holes and no penetration of water, which is waterproof and warmer.

What are the characteristics of the embossing machine?

1. The embossing machine uses vibrations and steel wheels to make garments after being pressed, it can obtain the functions described above.

2. The embossing machine does not emit smoke or sparks, does not damage the fabric edges, and can also avoid grooves.

3. The flower wheel is easy to replace and different round flower wheels can be exchanged according to the customer's request.

4. The grinding machine does not need to be preheated and can be operated continuously.

5. The embossing machine can be equipped with colored paper and gold foil paper, which can achieve color printing and hot printing functions under pressure.

6. The embossing machine can be combined into a special machine with several units to produce products with larger widths such as stepping pads, umbrellas, etc. to be completed at once.

7. The flower wheel consists of a special alloy steel material and is subjected to a special heat treatment process which is characterized by wear resistance and long service life.

This is the information about the embossing machine. If you would like to learn more about the embossing machine, please connect Dong Guan Do Hearts Technology Co.,Ltd