Maintenance of plastic dropping machine/dispensing machine

     The daily maintenance of the dispenser directly affects the service life of the dispenser. The daily work of dispensing machine maintenance has a great influence on the service life of the dispensing machine, including the smoothness of the normal use process. The following are the daily maintenance steps of the dispensing machine:

1. To replace the rubber type, the pipeline needs to be cleaned. At this time, first close the feed valve, open the discharge valve, and discharge the remaining rubber material in the rubber bucket, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber storage tank, activate the machine, and press the solvent out according to the usual operation method. out rinse.

2. If the air intake is abnormal and there is water vapor, please remove the water vapor in the pressure regulating filter or check whether there is any abnormality in the air pressure source. Before the glue is used in large quantities, please try it out in a small amount first, and master the skills of using the product to avoid mistakes. The vacuum system vacuumizes and defoams the glue to remove the air bubbles generated during the mixing process, or let it stand for 10-20 minutes before using it, so that the air bubbles generated during mixing can be removed in time, and the more glue mixed together.

3. Please wipe clean the machine part regularly to increase the service life. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so the glue should be properly mixed according to the actual production situation, otherwise the glue will be wasted. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.

4. When the machine is not in use for a long time, the power supply should be unplugged, which will not only prolong the life of the machine but also save a lot of electricity bills. With the needs of ever-changing industrial development, liquid control technology and dispensing equipment are also constantly developing to ultra-high precision control and diversification and specialization.

   Note: After each use, clean it well. Wipe the places that can be seen. Wipe it with alcohol. It is best to put oil or butter on the parts that move frequently to keep lubricated. If you don’t use it for a long time, you must polish the glue. , otherwise it solidifies in the LED dispenser and needs to be cleaned, which is very troublesome.