How to use label machine?

The type of label machine is divided into linear label machine and rotary label machine. The main categories are: automatic vertical round bottle label machine, automatic horizontal round bottle label machine, automatic corner label machine, automatic wine label machine, flat label machine, automatic flat line labeling head , Upper and lower self-adhesive label machine, double-sided pneumatic label machine, single-sided label machine, semi-automatic flat label machine, semi-automatic round bottle label machine, etc.

How do we solve the problem of label machine warping?

How to install label machine normally?

What should I pay attention to when using the label machine?

How do we solve the problem of label machine warping?

1. When using the label machine, try to use soft label materials. Good label ductility will greatly improve the label warping.

2. Change the shape of the label.

Make the bottom of the label into an arc shape, and try to avoid the deformation zone of the end seal. Of course, the arc cannot be opened too deep, otherwise the label itself will easily cause wrinkles and increase unnecessary trouble. For special-shaped end sealing, the shape of the label is required to be changed accordingly, which can not only avoid label warping, but also increase the aesthetics.

3. Eliminate the influence of static electricity.

The label machine is prone to static electricity during the labeling process, which will have an impact on the labeling effect. Appropriately increasing the humidity of the labeling site will improve it to a certain extent. The use of ion fans is also an effective solution. The label machine is equipped with automatic humidity control, which can also control the cleanliness of the equipment separately, keep the label away from dust, and improve the labeling quality of the product. In this way, there is no longer the phenomenon of label warping during the labeling process, and the visual effect is achieved.

How to install label machine normally?

1. When using the label machine to add labels, make sure that the label is properly pressed. If the pressure is too large, it will cause misalignment of the label when labeling. At the same time, accelerating the label hook will also cause a certain amount of wear.

2. When using the label machine to add labels, ensure that the labels are aligned, the label should be kept between 0.1~0.2mm between the guide forks and the fingers should be evenly pressed on the edge strips. After the finger is opened, the roller sponge needs to press the label on the bottle, and then adjust the vertical and horizontal positioning plate to ensure that the label will not be skewed.

What should I pay attention to when using the label machine?

Take the automatic round bottle label machine as an example. When the bottle reaches the labeling position through the conveyor belt, it is necessary to ensure that the label brush of the label machine vertically and steadily presses the label evenly. The labeling position is skewed, so the operator needs to pay attention to this point. When the labeling of the automatic label machine is found to be skewed, the pressure of the standard brush should be adjusted.

Dong Guan Do Hearts Technology Co.,Ltd is known for high precision label machines. And you can connect them.