Why do we need a silicone dispenser machine?

Goods made by silicone machine can be printed on gloves, clothing, paper, sports goods, etc., and can be silk-screened, machine-printed, high-frequency press, etc. The screen printing process does not require baking, saving time, labor and electricity, and improving the working environment.

What is the production process of silicone machine?

What are the main features of silicone machine?

How does the silicone dispenser machine change the glue?

What is the production process of silicone machine?

Traditional process: silicone heat transfer glue + primer Prime

1. Choose suitable hot melt adhesive film (TPU) for silicone machine and clean it neatly;

2. Print or brush the Prime glue (such as CL-26AB-1), heat and cure at 90°C, and put it in the mold;

3. The silicone machine is integrated by injection molding with addition-molding liquid silicone;

4. After the silica gel and hot melt adhesive film are integrally formed, the required outer contour size can be die-cut;

5. The hot melt adhesive film of the trademark label touches the fabric on one side, and the silicone machine is heated and pressurized at high temperature and integrated with the fabric.

What are the main features of silicone machine?

1. The silicone machine has a precise direct pressure clamping mechanism ----- to ensure uniform distribution of clamping force and high parallelism;

2. The silicone machine has a secondary mold clamping and exhaust function, and can be equipped with a vacuum machine to remove the air trapped in the product;

3. The silicone machine has a clamping system and adopts a pressure sensor to achieve precise infinite loop control;

4. The silicone machine has a multi-stage PID SSR precision electric heating temperature control system;

5. The silicone machine has the function of detecting the temperature line disconnection-----guarantee that the finished product is in good condition;

6. The silicone machine has the function of mould timing preheating-----improving efficiency;

7. The silicone machine has a high-response injection system and an automatic V-P conversion function-the product is precise and stable;

8. LSR special hydraulic and water-cooled rubber-sealed injection nozzle ---- prevent the injection nozzle from leaking and solidify the plug;

9. The silicone machine has a special feeding system design and is equipped with a German 2KM feeding mixer-feeding and metering are more accurate;

10. The silicone machine has a full range of abnormality detection and shutdown functions-to improve the efficiency of the operator in solving problems;

11. SPC diversified production management chart-----Improve the management efficiency of managers;

12. The silicone machine has diversified ejection functions-to meet the requirements of different complex molds;

13. silicone machine can choose models such as standard, single slide, double slide and multi-die disc machine.

How does the silicone dispenser machine change the glue?

It depends on how your silicone is installed. If it is the usual 330ml bottle, it only needs to be replaced each time. If it is filled with glue, it needs to be poured again. There is also a syringe type, but there are very few syringes for silicone.

Dong Guan Do Hearts Technology Co.,Ltd is a silicone dispenser machine manufacturer established for more than five years. We work with customers from design to completion to ensure that all technical requirements are met.